PCP High-Pressure Air Compressor Portable 110v AC 4500PSI 30Mpa,Powered by Car 12V Dc or Home 110V/220V Ac Scuba Tank Compressor Pump

Details Thoughtful Accessories: We provide practical accessories, including air plugs, air nozzles, gaskets, rupture discs, check valves, etc., for your convenience and ease of use.Anti-slip Feet: They keep the machine stand stable and also prevent the table from being scratched.Quick-fit Connector: A 8mm quick-fit connector allows for convenient, easy, and quick connections.Smooth Edges: The smooth edges without burrs enhance the beauty of the product and better care for your skin when cleaning and using it.ApplicationIt can quickly fill air bottles (up to 1.06 qt capacity). It fits most PCP airguns, air rifles, and paintball HPA tanks (<1.06 qt, e.g. 48/3000, 26/3000, etc.).First Use Steps1. Check the AC voltage at the bottom (default 110V).2. Connect the power supply and air hose.3. Turn on the cooling fan.4. Tighten the release valve to the right.5. Set air pressure.6. Start the compressor.7. After inflation, loosen the release valve.8. Disconnect and save.SpecificationColor: OrangeProcess: SprayingMaterial: Aluminum, Stainless SteelMount Type: FreestandingAssembly Required: YesPower Source: Battery PoweredNoise: 75dBPower: 250WMotor Horsepower: 0.75HPCapacity: Less Than 1L/1.06QtPower Supply: 110V AC/12V Car Battery (40+A)Maximum Air Pressure: 300Bar/4500PSICooling Fan Speed: 12500rpmFilling Speed: 0.5L/0.53Qt, Takes about 18 MinutesConnector Size: 8mm/0.315inAir Compressor Size: 20*17*13.5cm/7.87*6.69*5.31inPackage Size: 30*26*26cm/11.81*10.24*10.24 inNet Weight: 5.2kg/11.46 lbsGross Weight: 7.2kg/15.87 lbsPackage Included1* Air Compressor1* Transformer1* Air Hose1Pair* Battery Power Cables1* English ManualAll Accessories for UseNotes 1.Please read the instruction manual completely before installation and use, and pay particular attention to the safety instructions included.2.You need to check the air pressure value yourself.3.Please confirm whether there are loose fasteners in various parts before use. Please confirm whether the fan operates normally after the machine is started and whether there are any abnormalities in the sound of the machine, such as friction sound, uneven operation sound, and air leakage sound. 4.You need to manually stop the inflation when the air pressure reaches the set point, when it has been inflated for 25 minutes, or when the temperature reaches 185℉. A beep will sound when inflation is complete. 5.After a full load, please keep the cooling fan running for a few minutes and then manually turn it off. The compressor switch and cooling fan switch need to be pressed briefly, not continuously.6.The process of automotive use is similar to using home, red corresponds to "+" and black corresponds to "-". It is necessary to keep the car started while the compressor is working.7.Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement and make sure you do not mind before ordering.

• Powerful & Efficient: Equipped with a 250W motor, our compressor inflates up to 4500PSI quickly—fill 0.53qt in just 6 minutes at higher pressures.
• Versatile Power Supply: Supports both 110V AC and 12V car battery power, making it for home use or outdoor adventures.
• Robust Design: Made from high-strength aluminum and stainless steel, our compressor is wear-resistant and shockproof, designed to withstand various outdoor conditions.
• Easy Operation: Features an intuitive control panel with a cooling fan switch, pressure gauge, and temperature display for easy monitoring and operation.
• Safety Protection: Built-in cooling fan, pressure relief design, and multiple heat dissipation holes ensure safe, stable operation during use.