Spax 1.4567-25170004503521 Facade Screw, Raised Countersunk Head T-Star Plus, Cut, Partial Thread, Stainless Steel A2, 25170004507021

SPAX - Safety, quality and reliability since 1967. The branded product in the characteristic green packaging – produced at home in Germany and exported from there to all over the world: clever minds in Ennepetal constantly develop new ideas, expand the product range and establish the highest quality for DIY enthusiasts, professional processors, planners and architects all over the world. - This product is suitable for use: for visible and invisible screwing of façade woods in outdoor areas, e.g. floor cover formwork. High corrosion resistance thanks to stainless steel A2 - raised countersunk head for aesthetic look and clean countersinking thanks to milling ribs. Optimum power transmission and clean fit with SPAX bit T-Star plus T20 with guide pins. Effortless work and longer battery life: no pre-drilling (depending on wood). Precise attachment and reduction of the splicing effect thanks to the drilling function of the CUT tip. Easier cutting of the wood fibre thanks to Spax-typical wave profile - Made in Germany. Approved for building inspection: European Technical approval for screws as wood fasteners in load-bearing wooden constructions (ETA-12/0114) - Box contents: 1 SPAX box, 100 pieces facade screw, T-Star plus, raised countersunk head, partial thread, cut tip, stainless steel A2, material quality: 1.4567, thread diameter (Ød1) = 4.5. mm x Total Length x Total Length = 70 mm, partial thread length (LgT) = 42 mm, head diameter (Ødk): 8.8 mm, bit not included

• Use: For visible and invisible screwing of facade wood in outdoor areas e.g. floor cover formwork. High corrosion resistance thanks to A2 stainless steel
• Raised countersunk head for aesthetic look and clean countersinking thanks to milling ribs. Optimum power transmission and clean fit with Spax bit T-Star plus T20 with guide pins
• Effortless work; and longer battery life: no pre-drilling (depending on the wood). Precise positioning and reduction of the splicing effect thanks to the drilling function of the CUT tip. Easier cutting of the wood fibre thanks to Spax-typical wave profile
• Made in Germany - approved for use in the building inspection: European Technical Approval for screws as a wood connecting medium in carrying wood constructions (ETA-12/0114)