TSS-106-47 Trailer Auxiliary Helper Springs Pair – Air Helper Style Suspension Kit for 3000-5000 lbs GAWR Axles – Left & Right Set – Enhances Load Leveling, Reduces Sway & Bottoming Out

Heavy-Duty Auxiliary Helper Springs for Trailers (GAWR 3000-5000 lbs) Model: TSS-106-47 | Left & Right Pair Restore your trailer's handling and safety with this professional-grade Auxiliary Helper Spring Kit. Designed for trailers with a Gross Axle Weight Rating (GAWR) of 3,000 to 5,000 lbs, this system is the ultimate solution for preventing rear sag, reducing sway, and protecting your cargo. 🚨 IMPORTANT FITMENT CHECK: Before purchasing, you MUST verify your trailer's specifications: Axle Capacity: Must be between 3,000 lbs and 5,000 lbs GAWR. Application: Suitable for single or tandem axle trailers (utility, boat, cargo, camper). Compatibility: Designed as a direct replacement or upgrade for systems requiring TSS-106-47 specifications. Measurement Required: Since trailer axle designs vary (Dexter, Lippert, etc.), please measure your current leaf spring length, width, and eye-to-eye distance to confirm these helpers will fit your mounting brackets. Why You Need Helper Springs: Factory trailer suspensions are designed for an "average" load. When you haul heavy equipment, boats, or construction materials, your trailer likely suffers from: Rear End Sag: The back of the trailer drops, causing poor hitch angle and unsafe towing dynamics. Excessive Sway: Light rear ends make trailers prone to fishtailing in wind or when passing trucks. Bottoming Out: Hitting bumps causes the axle to slam into the frame, damaging both your trailer and your cargo. Uneven Tire Wear: Improper alignment due to sagging accelerates tire wear. 🌟 Key Performance Benefits: Load Leveling: Keeps your trailer level regardless of cargo weight, ensuring proper tongue weight distribution. Enhanced Stability: Stiffens the suspension response to reduce body roll and sway during lane changes and turns. Impact Protection: Acts as a buffer against road shocks, extending the life of your trailer frame and axle components. All-Weather Durability: Built with corrosion-resistant materials to withstand rain, snow, road salt, and UV rays. 🔧 Installation Overview: This kit includes one pair (Left and Right) of helper springs. Safety First: Securely block the trailer wheels and support the axle with jack stands. Inspect: Check existing leaf springs and mounting brackets for rust or damage. Mount: Install the helper springs according to the specific configuration of your axle (some may require sliding between leaves, others bolt onto brackets). Test: Lower the trailer and test with a loaded condition to ensure proper clearance and operation. Note: While designed for easy installation, some trailer configurations may require minor adjustments or specific U-bolt re-torquing. Professional installation is recommended if you are unsure about your trailer's suspension geometry. 📦 Package Includes: 1 x Pair of Auxiliary Helper Springs (Left & Right) (Hardware included as per standard TSS-106-47 configuration; verify against your specific axle needs) ⚠️ Safety Warning: Do not exceed your trailer's maximum Gross Vehicle Weight Rating (GVWR) or Gross Axle Weight Rating (GAWR). These helper springs improve stability and prevent sag but do not increase the legal weight capacity of your trailer axle. Always tow within manufacturer limits. Upgrade your towing experience today. Don't let a sagging trailer compromise your safety on the road.

• 【🛑 CRITICAL FITMENT: 3000-5000 LB GAWR】 Designed specifically for trailer axles with a Gross Axle Weight Rating between 3,000 and 5,000 lbs. Essential for utility, boat, cargo, and camper trailers. Measure your existing leaf springs before ordering to ensure dimensional compatibility.
• 【⚖️ ELIMINATE SAG & SWAY】 Instantly restores ride height when hauling heavy loads. These helper springs prevent rear-end squat, reduce dangerous body roll during cornering, and minimize trailer sway for safer towing stability.
• 【🛡️ PREVENT BOTTOMING OUT】 Provides crucial additional support to your existing suspension. Absorbs shock loads when hitting bumps or potholes under weight, protecting your trailer frame, axle, and cargo from impact damage.
• 【🔧 DURABLE HEAVY-DUTY BUILD】 Constructed from high-tensile materials resistant to road salt, UV exposure, and extreme weather. Engineered to withstand the rigors of frequent hauling without cracking, leaking, or losing tension over time.
• 【📐 DIRECT REPLACEMENT SPECS】 Matches OE specifications for TSS-106-47 applications. Sold as a complete Left & Right Pair. Simplifies installation with standard mounting hardware (verify your axle bracket type). Ideal for upgrading worn-out factory suspension.